The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Cali 3 Cali 1100 1994-1997 Electrics

Sort by Title

Sort by Price

Page 8 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Distributor Cap Plastic

ENA14420 Fits 850/1000 ALL Models, V7 Sport

Dimensions:
40mm overall height

Black Magneti Marelli plastic distributor cover for models with points or most electronic ignitions (not Piranha)

See SSA05025 for the screws which secure this dizzie cap

part in stock 1 in stock

14715420 GU14715420 14 71 54 20
1471 5420 1471.5420 14.71.54.20

£21.50

INC VAT

£17.92 EX VAT this is the price you will pay if you are ordering from outside the UK

4 Pin 2 x 2 Male Block Connector

ELA20076 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport

4 pin male block connector arranged in two rows of two used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block

part in stock 1 in stock

£2.30

INC VAT

£1.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Double Banjo Fine Thread Stainless Steel

BRA01003 Universal Part

Dimensions:
M10 double banjo fine thread

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

part in stock 1 in stock

£24.50

INC VAT

£20.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Position Sensor

ELA30501 Fits Cali 1100 Series 1 (1994-1997), Cali 3 IE, Daytona RS, Centauro, MGS-01

TPS for throttle body

On Cali 1100 check which TPS you have (varies according to ECU)

part in stock 1 in stock

30530501 GU30530501 30 53 05 01
3053 0501 3053.0501 30.53.05.01

£109.00

INC VAT

£90.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Starter Motor and Solenoid

ELA30837 Fits 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Nevada 750 (1991-2008), Breva 750, Cali 1100, Cali EV, Cali Jackal, Cali Stone, Cali Classic, Cali Vintage, V11 Sport, 1100 Sport ALL, Centauro, V7 700, V7 Special (1969-1971), 850GT, Eldorado, Ambassador

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

part in stock 1 in stock

30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11

£125.00

INC VAT

£104.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Switchgear L/H Pattern (Dip, Horn, Indicators and Pass)

ELA01729 Universal Part

Dimensions:
350mm lead

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

This part is available by special order, request a quote

£88.00

INC VAT

£73.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Domino Switchgear L/H Pattern (Lights, Dip, Horn, Indicators and Pass)

ELA01730 Universal Part

Dimensions:
520mm lead

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

01738030 GU01738030 01 73 80 30
0173 8030 0173.8030 01.73.80.30

£88.00

INC VAT

£73.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Switchgear R/H Domino (Start/Kill)

ELA01738 Universal Part

Dimensions:
300mm lead

Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.

This part is due back in stock soon, call 01484 841395 to reserve yours

01738800 GU01738800 01 73 88 00
0173 8800 0173.8800 01.73.88.00

£51.00

INC VAT

£42.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Coil Clamp

ELA10122 Fits 750S, V7 Sport, S3, 850/1000 ALL Models